Pedrollo PRO NGA Centrifugal Pump

Pedrollo PRO NGA
Specifications
Flow rate up to 160 L/min (9.6 m³/hr)
Dynamic head up to 23m
OPERATING LIMITS
Suction lift up to 7m
Fluid temperature up to + 90°C
Maximum ambient temperature + 55°C
PUMP INSTALLATION AND APPLICATIONS
THE HYDRAULIC PERFORMANCE OF THIS STURDY AND COMPACT PUMP MAKES THEM IDEALLY SUITED FOR DOMESTIC, AGRICULTURAL OR INDUSTRIAL USES for clean water not containing abrasive particles, and fluids which are not chemically aggressive to the pump components.
These pumps should be installed in a covered area, protected against the weather.
PERFORMANCE
The AL - RED pump is designed to suit a wide range of applications, with features including:
Anti-seize, stainless steel pump head suitable for industrial use.
STRUCTURAL CHARACTERISTICS
Stainless Steel AISI 304 PUMP BODY, with UNI ISO 228/1 threaded suction and delivery ports
Stainless Steel MOTOR BRACKET .
Stainless Steel BODY
Stainless Steel IMPELLER, with centrifugal radial flow
EN 10088-3-1.4104 stainless steel MOTOR SHAFT
MECHANICAL SEAL: ceramic - carbon - NBR
MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with <IM B3> structural shape, suitable for continuous duty. INSULATION class F.
A thermal cutout device (motor protector) is incorporated in single phase motors.
Three phase motors require an adequate external motor protector complying with current standards
PROTECTION IP 44.
Manufacturer:
Pedrollo Pumps

For next day delivery, please ensure your order is placed before 2pm. For any orders after this time that still require next day delivery, please contact the office on 01977 602200.