PUMP INSTALLATION AND APPLICATIONS
Combipress pressure booster sets are pre-assembled ready for installation.
The sets operate as "duty-assist", with one or both pumps starting automatically in succession as demand for water increases. This system is energy efficient as it only starts the pumps necessary to meet the demand. The lead pump is alternated automatically by the control panel.
These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components.
Examples of use
Water supply: pressure boosting for industry, condominiums, hotels, communities, water treatment plants, camping sites, schools, hospitals, barracks, etc.
Irrigation: football and sports grounds, golf courses, agriculture and artificial snow systems.
Pumps complete with suction and delivery manifolds, ball valves and non return valves.
Base made of power-painted metal sections.
Control Systems pre-installed on the delivery manifold, comprising pressure gauge, connection for pressure vessel (not supplied), and two user adjustable pressure switches. The factory settings are shown in the tables below.
Control Panel with door interlocked power switch, low voltage pressure switch control circuit, automatic pump changeover, thermal motor protector and "anti-bounce" system to ensure that the pumps run for an acceptable period once started.
CB2m: single phase 230 V - 50 Hz including capacitor, and with integral thermal overload protection.
CB2: three phase 230/400 V - 50 Hz up to 4 kW - 400/690 V - 50 Hz from 5.5 to 18.5 kW
Installations must comply to Water Bye-laws in the UK.
See the complete Booster Set Pump Range.