Pedrollo 2-CP Centrifugal Pump

Pedrollo 2-CP
Specifications
Flow rate up to 400 l/min (24 m³/h)
Dynamic head up to 112 m
Pump installation and applications
These pumps are suitable for handling clean water and fluids which are not chemically aggressive to the pump components. They are an obvious choice wherever there is a need for high head values hard to reach with single impeller pumps.
2CP series pumps are extremely reliable, simple to use, quiet and virtually maintenance-free, finding many uses in domestic, civil and industrial applications, pressure boosting, boiler feed, cooling systems and fire-fighting units.
Performance
The wide range of pumps in the 2cp series have the following features:
Long even performance curves (high ratio between maximum & minimum head values);
High outputs;
Flat absorption curves at high delivery rates, preventing motor overloading even during prolonged use;
Good suction capacities both at low and high delivery rates
Curve tolerance according to iso 2548.
Structural characteristics
Cast iron suction body with uni iso 228/1 gas threaded suction and delivery port.
Cast iron delivery body with uni iso 228/1 gas threaded delivery port.
Brass impeller, centrifugal radial flow type.
Aisi 316 stainless steel motor shaft (aisi 416 up to 0.75 kw).
Ceramic and graphite mechanical seal
Motor: pumps are coupled directly to an asynchronous, high efficiency pedrollo induction motor of suitable size, which is quiet running, closed and externally ventilated, suitable for continuous duty.
Insulation class f (b up to 0.75 kw).
A thermal cutout relay (motor protector) is incorporated in single phase motors up to 1.5 kw.
Protection IP 44.
Manufacturer:
Pedrollo Pumps

For next day delivery, please ensure your order is placed before 2pm. For any orders after this time that still require next day delivery, please contact the office on 01977 602200.