Tsurumi PNI Submersible Pumps
Tsurumi PNI Submersible Pumps are multi-purpose pumps that have adopted stainless steel where metal must be used, while other strategic components are molded in or armored with high tech resins. Durable, stable in operation and compact.
Vortex Impeller
This impeller is used mainly to avoid clogging or wear by large or stringy solids in the water. It accelerates part of the water to great speed, and this speed is used to smoothly move all the water from inlet to outlet.
Adjustable Float Switch
Start and stop level can be adjusted, built-in auto-Manual selector Switch.
Lightweight
The idea that pumps must be made through casting is already a thing of the past. PNI pumps are the brain child of Tsurumi´s efforts to get rid of full-cast pumps through material innovation. This has reduced the average weight of PNI pumps to less than half of that of conventional equivalents. Also, installation and maintenance work for these new pumps have become far easier than ever before.
Material
ø Discharge bore mm | 50mm | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Municipal sewage, water with solids | |||
Pump | Compo- nents | Impeller | Vortex impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Glass fibre reinforced plastic | ||
Upper casing | Glass fibre reinforced plastic | |||
Lower casing | Plastic | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Insulation | Insulation class E | |||
Motor Protector (built-in) | Miniature protector, Circle thermal cut-out | |||
Phase / Voltage | Single phase 230V / 50Hz | |||
Material | Casing | Stainless steel EN-X5CrNi18-10 | ||
Shaft | Stainless steel EN-X6Cr13 | |||
Cable | Rubber, 10m H07RN-F | |||
Discharge Connection | Inside thread, flange | |||
Optional Accessories | Guide rail fitting "TOK" for small pumps |