Tsurumi OM Submersible Pumps
Tsurumi OM Submersible Pumps have a light fibre-reinforced plastic casing and head cover, the pump is abrasion and corrosion resistant, minimizing maintenance.
Vortex Impeller
This impeller is used mainly to avoid clogging or wear by large or stringy solids in the water. It accelerates part of the water to great speed, and this speed is used to smoothly move all the water from inlet to outlet.
Free impeller passage 10mm - the vortex impeller eliminates blocking and binding.
Material
ø Discharge bore mm | 32mm | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Domestic sewage | |||
Pump | Compo- nents | Impeller | Vortex impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Glass fibre reinforced plastic | ||
Upper casing | Glass fibre reinforced plastic | |||
Lower casing | Glass fibre reinforced plastic | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Insulation | Insulation class E | |||
Motor Protector (built-in) | Circle thermal cut-out | |||
Phase / Voltage | Single phase 230V / 110V / 50Hz | |||
Material | Casing | Stainless steel EN-X5CrNi18-10 | ||
Shaft | Stainless steel EN-X6Cr13 | |||
Cable | Rubber, 10m H07RN-F, Rubber, H07RN-F | |||
Discharge Connection | Inside thread, flange |