Tsurumi C Submersible Pumps
Tsurumi C Submersible Pumps have Saw-shaped fixed blades are used in combination with carbide blades in an impeller-integrated structure. This construction ensures that fibrous foreign matter is cut up and sewage is transferred without clogging.
Non-clog impeller with cutter mechanism
A "cutter mechanism" is provided by the combined action of a carbide blade integrated into a non-clog impeller and the saw-shaped inner surface of a suction cover.Please carefully consider type of solids and maximum passage way when selecting a cutter pump. For support, please contact Tsurumi or your local dealer.
Optional Accessories
:• Guide rail fitting consisting of:
- Guide support / Guide hook
- Duck foot bend - Lifting chain
• Discharge bend
• Stand for free standing type (5,5kW or over)
Material
ø Discharge bore mm | 50mm, 80mm,100mm | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Wastewater and liquid carrying waste and foreign matters | |||
Pump | Compo- nents | Impeller | Non-clog impeller with cutter mechanism | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Grey iron casting EN-GJL-200 with sintered tungsten carbide alloy tip, Chromium iron casting with sintered tungsten carbide alloy tip | ||
Casing | Grey iron casting EN-GJL-200 | |||
Suction Plate | Ductile iron casting EN-GJS-700-2, Chromium iron casting | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 2 poles, IP68, Induction motor, 4 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Insulation | Insulation class E, Insulation class F | |||
Motor Protector (built-in) | Circle thermal cut-out | |||
Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d. | |||
Material | Casing | Grey iron casting EN-GJL-150, Grey iron casting EN-GJL-200 | ||
Shaft | Stainless steel EN-X6Cr13, Stainless steel EN-X30Cr13 | |||
Cable | Rubber, 10m H07RN-F | |||
Discharge Connection | Inside thread, JIS10K flange | |||
Optional Accessories | Guide rail fitting "TOS" (guide support, duck foot bend, lifting chain) / Bend and stand set for free standing types |