Tsurumi 80UYZ Submersible Pumps
Tsurumi 80UYZ Submersible Pumps are equipped with a vortex-impeller and a wide pump-casing. This construction prevents clogging by big or fibrous impurifications.
Vortex Impeller
This impeller is used mainly to avoid clogging or wear by large or stringy solids in the water. It accelerates part of the water to great speed, and this speed is used to smoothly move all the water from inlet to outlet.
Available options
• Explosion proof version
• Oil sensor
• Motor versions up to 2.9 kW in d.o.l., 3.7kW-motor either in d.o.l.- or star-delta-start, from 5 kW on only start-delta-start
• All pumps can be operated with soft-starter and frequency-converter
Discharge bore mm | 80mm | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-35°C | ||
Type of Fluid | Municipal sewage | |||
Pump | Compo- nents | Impeller | Vortex impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Grey iron casting EN-GJL-250 | ||
Casing | Grey iron casting EN-GJL-250 | |||
Shaft Seal | SiC, upper in oil bath | |||
Wearring | Bronze | |||
Motor | Type, Poles | Induction motor, 4 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Insulation | Insulation class H | |||
Motor Protector (built-in) | Miniature protector | |||
Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d. | |||
Material | Casing | Grey iron casting EN-GJL-250 | ||
Shaft | Stainless steel EN-X5CrNiMo17-12-2 | |||
Cable | Rubber, 10m H07RN8-F | |||
Discharge Connection | Flange DIN/ANSI DN80 (PN10) | |||
Optional Accessories | Guide rail fitting "TOS" (guide support, duck foot bend, lifting chain) / Bend and stand set for free standing types |