Tsurumi LH Series Submersible Pumps
Tsurumi LH Series Submersible Pumps are manufactured to keep up with developments of civil engineering and architectural technologies are increasing the necessity of digging deeper into the earth. This requires a submersible pump with a rugged construction that can withstand the high pressure so deep in the water.
Material
ø Discharge bore mm | 100, 150, 200 | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Spring water, Rain water, Ground water, Sand carrying water | |||
Pump | Compo- nents | Impeller | Closed type impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Chromium iron casting | ||
Casing | Ductile iron casting EN-GJS-450-10, Grey iron casting EN-GJL-200 | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Motor Protector (built-in) | Circle thermal cut-out, Miniature protector | |||
Insulation | Insulation class B, Insulation class F | |||
Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d. | |||
Material | Casing | Grey iron casting EN-GJL-200 | ||
Shaft | Stainless steel EN-X30Cr13 | |||
Cable | Rubber, NSSHÖU | |||
Discharge Connection | JIS 10K Flange, JIS 20K Flange |