Tsurumi KTD Submersible Pumps
Tsurumi KTD Submersible Pumps are powerful slurry pumps using KTZ pumps as a base. Features wear resistance and durability.
Forced agitation
The agitator installed on the motor shaft extension forcibly agitates the fluid for easy and efficient transmission of sludge and slurry.
Rugged
By offering a cast iron pump body, our durability is increased over standard aluminium body pumps.
Efficient motor cooling
Slim line design with a top discharge offers economy of space. There is efficient motor cooling through a side flow channel.
Material
ø Discharge bore mm | 50, 80 | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Sludge, Slurry, Liquids containing sandy mud and/or bentonite | |||
Pump | Compo- nents | Impeller | Semi-open type impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Chromium iron casting | ||
Casing | Grey iron casting EN-GJL-200 | |||
Suction Plate | Ductile iron casting EN-GJS-500-7 | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Motor Protector (built-in) | Circle thermal cut-out | |||
Insulation | Insulation class F | |||
Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l. | |||
Material | Casing | Grey iron casting EN-GJL-200 | ||
Shaft | Stainless steel EN-X30Cr13 | |||
Cable | Rubber, NSSHÖU | |||
Discharge Connection | Threaded flange/Hose coupling |