Tsurumi KRS2 Submersible Pumps
Tsurumi KRS2 Submersible Pumps are suitable for most demanding jobs. 4-pole motor used to achieve a simple structure that demonstrates excellent durability and versatility.
Forced agitation
The agitator installed on the motor shaft extension forcibly agitates the fluid for easy and efficient transmission of sludge and slurry.
Rugged
4-pole motor used to achieve a simple structure that demonstrates excellent durability and versatility. By offering a cast iron pump body durability is increased over standard aluminium body pumps.
Material
ø Discharge bore mm | 80, 100, 150, 200 | |||
---|---|---|---|---|
Pumping Fluid | Temperature | 0-40°C | ||
Type of Fluid | Sludge, Slurry, Liquids containing sandy mud and/or bentonite | |||
Pump | Compo- nents | Impeller | Open type impeller | |
Shaft Seal | Double mechanical seal | |||
Bearings | Shielded ball bearings | |||
Material | Impeller | Chromium iron casting | ||
Casing | Grey iron casting EN-GJL-200 | |||
Suction Plate | Chromium iron casting | |||
Shaft Seal | Silicon carbide in oil bath | |||
Motor | Type, Poles | Induction motor, 4 poles, IP68 | ||
Lubrication | Turbine oil (ISO VG32) | |||
Motor Protector (built-in) | Circle thermal cut-out | |||
Insulation | Insulation class E, Insulation class B | |||
Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l. | |||
Material | Casing | Grey iron casting EN-GJL-150 | ||
Shaft | Stainless steel EN-X30Cr13 | |||
Cable | Rubber, NSSHÖU | |||
Discharge Connection | Threaded flange/Hose coupling |