Speroni CAM66 230V Self Priming Pump

 
£181.64
(£217.97 inc tax)
19-15-1089
+
Add to wish list

Speroni CA CAM Cast Iron Self Priming Pumps are single stage, self-priming "jet" pumps with cast-iron bodies. Motor sizes range from 0.60kW to 1.0kW and have impellers in thermoplastic and motor supports in aluminium, while the 1.1kW and 1.5kW are in 304 stainless steel and cast iron respectively. Venturis in all models are in thermoplastic. They have stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals and have IP44 motors. Single phase motors incorporate an overload protection device. They are designed for pumping clean water only at a maximum temperature of 35ºC. They should not be allowed to run dry, but by fitting an optional pressure controller (see pages 79 - 81) they can be protected from this and gives an automatic start and stop. Maximum recommended suction lift, when primed, is 8 metres. The pumps offer a wide pressure range for industrial boosting purposes, while their low operating noise, low power consumption also make them popular for a variety of domestic and horticultural applications.

Click on the photo's below for available accessories

Green Suction & Delivery HoseBlue Layflat HoseFemale Hose TailsMale Hose TailsHose Clamps

Pump Characteristics

  • Max. working pressure 6 bar
  • Liquid temperature up to 35°C
  • Ambient temperature up to 40°C
  • Total suction lift up to 8 mt.
  • Continuous duty

Motor Specifications

  • Two-Pole induction motor(n = 2850 min-1)
  • Insulation Class F
  • Protection IP 44

Materials of Construction

  • Pump body Cast Iron
  • Motor Support Aluminium- Impeller Noryl
  • Diffuser Noryl- Pump flange Stainless Steel
  • Shaft with rotor Stainless Steel
  • Mechanical seal Ceramic/Graphite
Control Voltage:
240V
Discharge Size:
1"
Manufacturer:
Speroni Pumps
Max Flow:
64 L/MIN
Max Head:
47M
Motor kW P2:
0.70KW
Suction Size:
1"
MPN:
19-15-1089

Speroni General Catalogue (Speroni_General_Catalogue.pdf, 16,199 Kb) [Download]

Speroni CAM 40 60 66 Data Sheet (CAM_40-60-66.pdf, 269 Kb) [Download]

Speroni Self Priming Pump Instructions (Self_Priming_Pump_Instructions.pdf, 6,611 Kb) [Download]

Speroni CAM 66 Spares (CAM_66_Spares.pdf, 713 Kb) [Download]

Please note all pumps are despatched at the earliest available for each manufacturer, this could be 9 -10 working days or more, for updated information please contact our sales office.

For next day delivery, please ensure your order is placed before 2pm Monday to Friday, orders received after 2pm Friday will be processed the next working day as we are closed at the weekend. For any orders after this time that still require next day delivery, please contact the office on 01977 602200.